Styloffice News | Office Furniture

The company's most valuable asset is the staff. Safeguarding their welfare in the workplace, ensures productivity and consequently the business results. Sometimes it may happen that both the workplace and its poor design, prevent developments in business and company culture.

To develop solutions for truly customized office furniture, our designers and architects take into account many factors related to the business reality of the customer: the business sector, human resources, the technology used in the company, the characteristics of the property.

We can tailor office space according to your needs. Our continues research in the field of office furniture and office walls, enables us to satisfy every desire, always bringing maximum comfort and design solutions to our achievements. It will not be only fate, if our furniture and our office partition walls are pieces of furniture for public and private companies worldwide.

For over twenty years we have been working both globally and nationally, thanks to our strong design and problem solving skills, while providing high quality office furniture and office walls.

Give a new shape to your office, make your business fly, trust only in those who really know the world of office furniture.

You can not avoid to have in your office an executive desk, which is unquestionably elegant in its simplicity of clean design and modern in fine details.

Our company, thanks to many investments made in technology, research and production, is able to offer to his clients a wide range of executive office desks, all characterized by design, quality materials and attention to details.

The high level of products is guaranteed by close collaboration with the best Italian designers, which allow us to propose elegant, sophisticated office furniture, but functional at the same time.

Our company is proud of the executive office furniture range designed and managed by Venetian designers Perin and Topan. The Xeno Altius range allows to satisfy the most demanding customers looking for sophisticated and special furniture elements. The queen of the entire range is the executive desk with leather top, with custom-made colours and stitching, the true touch of elegance and design.

Our attention is not limited to aesthetics, but also extended to the production. We pay attention that our office furniture comply with UNI standards for materials with low formaldehyde emission corresponding to the class E1 as per the EN1200 standards.

An absolute preview of the first pictures of the new office wall, Silent Wall. The continuous research of our company in the world of movable partitions has given birth to the new full double-glass office wall, characterized by considerable technical attributes and neat design, ideal for the division of spaces that require maximum light and acoustic comfort.

The product is already available and used in different projects.

Soon the entire catalogue.

Styloffice, a specialist in office walls, presents: Nemo Evolution, the first equipped glass office wall. Nemo, the glass office wall that allows you to invent and design spaces to live every day. Now also a glass can change appearance, color, shape and the possibility to be equipped whenever you want: customize the interior is very easy and special now.

Our company is fully dedicated to the world of office furniture, offering a wide range for executive to system furniture, seating, storage and wall partitions.

A perfect partner to furnish office spaces that stand for quality, versatility and efficienty. We are next in Bosnia Herzigovina, Sarajevo - Serbia, Belgrade - Macedonia, Skopje, where we will meet interior designers for planning for office space.

When you need to organize spaces, office or walls, customers and space designers ask for innovation, flexibility, easy design solutions, always bearing in mind the best quality price relationship.

A system of office walls, that thanks to  top and side adjustment, solves the problem of office rooms division  and filing.

TECHNICAL  FEATURES OF MIDDLE SIDES AND STRUCTURAL TOPS ON  FLOOR AND  TO  CEILING - Made of  18 mm  ecological wooden chip board, 22 mm thick, high-strength melamine-coated materials in aluminum finish. Edged with double-balloon seal for hydro-thermo-acoustic insulation. The sides have a double set of holes for assembly of structural tops,  for equipping of hinges for doors, for adjustable positioning of self-centering pins of middle shelves, for fixing of  filer drawer slides; further provided of  leveling feet on the inner side of the sides.

INITIAL AND FINAL SIDES  - Made with two coupled ecological chipboard panels. The outer panel 18 mm thick is covered  with high-strength melamine materials and bordered with ABS thick border and rounded edges. Wood and pastel finishes. The inner panel 14 mm thick coated on both sides with high strength melamine materials and bordered with ABS thick edge with  balloon for  hydro-thermal and acoustic insulation. Aluminum Finishes. The coupled sides have a thickness of 32 mm and allow, with a technic system of  coupling, to  uniform the gap  in the joints of all modules. The sides have a double set of holes for the assembly of structural tops, both of wood and metal,  for tooling of  hinges of the doors,  for the positioning of  self-centering pins of mobile metal tops,  for fixing of  drawer filers runners; are also equipped with leveling feet from the inner panel side.

DRAWER FILING FRONT PANELS - Made in the finish and thickness of the doors.

MOBILE TOPS  AND INTERMEDIATE STRUCTURAL METAL  TOPS - Made in steel sheet, thickness 8 / 10, prepared for inserting and sliding of the hanging folders. Epoxy powder coating aluminum color. The tops show 4 notching, 2 for each side, for solid joining to the pins with self centering neck chuck with extreme rapidity.

WOODEN DOORS - Made of  “ecological” wood agglomerate, 18 mm thick, high-strength materials melamine-coated in the same finishes, wood and pastel shades, as the partition wall panels. ABS edge thickness with rounded corners in the same finish as the doors. The doors are standardly equipped with a 2-3-4  pairs of hinges according  to their height with 90 ° opening (optional with 180 ° hinges). The entire door, the base door and the central door, is equipped with lock with sliding rod. The upper door has a fixed knob.

GLASS DOORS - These are made in two versions. Version 5 mm thick pure tempered glass transparent and etched (frosted). The doors are standardly equipped with a 2-3-4  pairs of hinges in relation to the same height, with 90 ° opening (on demand with 180 ° hinges). The doors are equipped only with knob without lock, regardless the height. Version with aluminum frame, having a  profile fitted with seal, 4 mm thick tempered glass, transparent and  etched (frosted). The doors are standardly equipped with knobs with or without lock and 2-3-4 pairs kf  hinges in relation to the same height, with 90 ° opening (on demand with 180 ° hinges).

MODULES – The joint lines characterizing the modules of the Facta office walls are the same as Tecna office partition walls in vertical modules. Moreover, without the addition of the upper adjusting panel but with a top, the office walls can become an open space or furniture system under the windows or as a cover for fan coil units.

JOINTS - Aluminum fittings provide necessary joints for office fitted walls and between partition wall and fitted wall.

MODULES’ BACKS  - Made of  “ecological” wood agglomerate, 18 mm thick, high-strength materials melamine-coated in the same finishes, wood and pastel shades, as the doors and the partition wall panels. ABS edge thickness with rounded corners in the same finish as the panels.

ADJUSTEMENT BANDS  - Made of  “ecological” wood agglomerate, 18 mm thick, high-strength materials melamine-coated in the same finishes, wood and pastel shades, as the partition wall panels and doors. ABS edge thickness with rounded corners.

WOODEN DOOR - Made of  wood, thickness 40 mm, coated on both sides in  laminate with the same finishes as the  filling panels, wood and pastel. ABS edging thickness with rounded corners in the same finishes of panels. The doors are standardly equipped with hinges, handle and lock, such as "push-open" or "lever".

GLASS DOORS - Made of tempered glass 10 mm thick, in clear, etched (frosted) and  printed versions. The doors are standardly equipped with hinges, handle and lock, such as "push-open" or "lever".

Technical specifications of Zen, Tecna and Open office walls.

UPRIGHT - The upright  consists of a shaped galvanized steel profile, 12/10 thick, size 60x32 mm cold profiled and seam welded, suitably slotted for technical usage and inclusive of co-extruded  insulating  hydro / thermal / acoustic,  anti-shock and anti-dust seals. The profile shows a double slotting on the major  side, on the outer sides every 32 mm,  to allow the locking of the  panels’ hooks and of  glass modules, at the center a  slot  of  50x23 mm every 200 mm for the possible passage of any technological networks and on the smaller side a central slotting  every  32 mm for assembling of  elements for the fitted office wall.

ADJUSTABLE FEET - The foot is  made of a “U” shaped galvanized steel bracket, obtained by printing, for snap insertion  into the base of the upright  and provided with adjustable screw,  operated with a hex key,  to compensate any disconnecton of the floor and allow leveling of the wall structure.

TOP AND BOTTOM CHANNEL - The channel is made of prepainted galvanized steel, 10/10 thickness, 64x55 mm, aluminium finish. Already equipped  with bi-adhesive gasket, the channel is fixed to the floor for insertion of the upright, allowing a telescopic movement of the two elements to correct any  discrepancies or bending of the slab. The system effectively improves sound-proofing rooms insulation, do to the missing of  some elements of acoustic bridge. On specific demand, however, it is possible to insert a spring pusher on the upper extremity of the upright.

LINKING CROSS BEAM/JACK  BEAM - Jack beam is made of a galvanized steel box-profile fitted to the ends with a  system of hook to the shelves of upright and with cable way holes for vertical technical use. The profile is obtained by press-work  12/10 thick, size  60x30x1000 and 1200 mm in width. The beam  is fitted on both sides of insulation hydro / thermal / acoustic, anti-shock and anti-dust gasket.

“QUEEN” BEAM  FOR NON STANDARD SIZES - The “Queen” beam  is used for less than 1000 mm  and over 1200 mm widths, for beams of 1600-2000-2400 mm width ranges, a part from non standard  widths. The “Queen” beam is made with the upright profile, cut on site or formerly pre-cut,  and is fitted at the ends of special Us, obtained by press-work, which are inserted to the upright shelves, with the same standard of the Jack beam. The beam  is fitted, to the two sides, of co-extruded gasket for hydro / thermal / acoustic / anti-dust insulation.

“U” FOR “QUEEN” BEAMS - The “U” hook is made by press-work of galvanized steel strip, suitably slotted and shaped for solid insertion of the “Queen” beams  to the upright shelves.

LINKINGS - The linkings are made by coupling an extruded aluminum round profile of 80 mm to  2 specular jaws  100x40 mm, also in  extruded aluminum, to make 2 - 3 - 4-way articulated joints and other rays. They are supplied with co-extruded gaskets and fixing accessories. Anodizing silver finish.

STARTING PROFILE FROM WALL  - The starting profile from wall of the office wall partition is achieved by an extruded profile made of plastic material, 100x20 mm, prepared with appropriate shapes to accommodate both starting upright and final panels of vertical adjustments. Aluminum finish.

TERMINAL PROFILE - The end profile is realized with 2 aluminum extruded profiles, trapezoidal base +  snap cover, size 100x40 mm. The profile allows to delimit your vertical  office wall partition at the center of the room, further it is also used to delimit horizontally and vertically Open Space office walls. Anodizing silver finish.

WOODEN ADJUSTING PANELS  - The panels are made of ecological chipboard, anti-scratch and anti-reflective coating, 18 mm thick, covered on both sides by high-strength melamine materials in wood and pastel finishings. Perimeteric edges covered with thick ABS with rounded corners in the same finishes of panels. The materials are E1 class (low formaldehyde emission), fire resistanant Class 2 (on demand fire resistance Class 1). The standard finishes are shown on the appropriate "color chart" (custom requests are evaluated by the technical department). The panels are supplied with hooks and self-centering screws (to be applied on site). Sizes vary depending on the type and forms of the office wall, may be vertical or horizontal. This upright anchorage is made   with a snap hook. This hooking system allows you to quickly remove the panels (with the aid of suction cups), to allow the inspection of the  interspace where  technological systems are. The same hook is prepared  to prevent the release of the panels making the environment inaccessible.

HOOK FOR GLASS MODULES AND PANELS - The hook is made by press-work of galvanized steel strip suitably slotted and drilled for attachment to the panel and the aluminum profile of the glass modules. The hook has also a hole which allows, by self-tapping screw, the firm assembling of the panels and modules to the upright. This system allows you to make a side of the wall inaccessible and secure.

DOUBLE GLASS FRAME - The frames of double-glazed modules are made with extruded aluminum profiles, 40x50 mm and assembled with die-cast squares in specular pairs for a total thickness of 100 mm. Anodizing silver finish.

SINGLE GLASS FRAME - The frames of single glass modules are made with extruded aluminum profiles, 40x50 mm and assembled with die-cast squares in specular pairs for a total thickness of 100 mm. Anodizing silver finish. The frames are fitted with plastic square fittings for the placement of the glass plate to the floor, in the case of full  height module, also on the beam, and in the case of mixed module. Security hooks, to block the glass, are also supplied to be fixed to the two uprights. The modules are supplied with hooks for fixing to the upright, pre-assembled, and transparent gaskets,  between the wall and profile to avoid direct contact of metal and glass and ensure the absence of acoustic and thermic bridges. The glass is 4 or 5 mm thick tempered depending on the  glazing and stratified on thickness of 3 +3 mm on demand.

DOOR  - The aluminum frame is made of extruded aluminum, size 100x40, assembled with die-cast bars. Silver finish anodizing.

SWING WOODEN DOORS - Made in honeycomb wood, 40 mm thick, coated on both sides of the same laminate finishes of closing panels. Thick ABS perimetric edge with angles. The doors are standardly equipped with hinges, handle and “push-open” lock  or "lever".

SWING GLASS DOOR - Made of tempered glass, 10 mm thick, in clear - etched - screen-printed versions. The doors are standardly equipped with hinges, handle and “push-open” lock  or "lever".

MODULES WITH FOLDAWAY SLIDING DOORS , IN WOOD OR GLASS - Made up of two modules one closed  to accommodate  the door being closed. The wooden door is made of honeycomb wood, 30 mm thick, aluminum finish. The door is equipped with "standard" sliding frame , double socket handle with Yale lock. The glass door is made of tempered glass, thickness 10 mm, in clear - etched - screen-printed versions. The door  is standardly equipped with sliding frame and double handle.

THE PLUS OF TECNA WALL HEIGHT ADJUSTMENT - The structure of the partition wall is formed by steel uprights that are based on a profile of galvanized sheet. At the bottom of the upright there is a small feet with a screw system of gradual adjustment  of the top and bottom wire. This feature compensates for any unevenness in the floor or ceiling height and inaccuracies detected.

MODULAR - The partition office wall "Techna" has a depth of 10 cm, the distance between modules is 500 - 1000 - 1200 - 1600 - 2000 -2400 mm and is available  in different types of height.

INTEGRABLE - Through a departure module, which allows an anchorage to the wall office, and eventually an adjustment module to fit on site, the partition office wall Tecna melts  with pre-existing concrete walls,  by integrating the partitioning without the granting of building permits. It thus contributes to the resolution of  space waste problem .Each available centimeter can become equipped space, glass area, and even a new crossable door.

SELF-STANDING – The lower and upper  steel channel,  assembled with the vertical uprights, the beams pylons, realize the concept of "solidary closed frame” Enclosed" and the structural conditions to allow the self-supporting. is' ​​clear that any condition of self-supported project that requires an accurate angle to create situations of self-help.

SOUND INSULATION - The dividing wall has an excellent sound insulation as the technical characteristics of the perimetric and beat gaskets, which allow a total adhesion between brushing and structures to eliminate sound transmission. Data on the acoustic behavior of the wall are detectable by the certificates issued by accredited institutions (Catas – Istituto Giordano)

FIRE RESISTANCE - Standard - metal structure class 0; panels class 2. Optional - Metal structure class 0, paneling class 1.

EASY  AND  RAPID ASSEMBLY - The assembly system uses a "single self-centering screw".  The glass modules are supplied with pre-fixed hooks. The coupling system, both of the panels and of glass modules, to the structure is on “snap”,  without any other intervention.

LATER RESTYLING  - The flexibility of the system  allows rapid disassembly and reassembly of all components according to a new layout with the simple use of  suction cups and normally used equipment. Any changes in the modules and the partitioning of the premises is allowed by the variability of the system. In any environment you are, also operative, the Tecna partition office wall  can be quickly partially disassembled  to be then reassembled according to the new layout. A simple suction cup allows the release of the panels and the uprights are extracted from the guide profiles. It remains only to decide the new location of the walls. The upright  can be cut again  if the  height is lower than the existing one, or if higher, can be increased just adding an upright segment to the existing one and fixed together with specific U.

The full height glass office wall is a modern system to divide the spaces inverting the relationship between wooden and transparent modules. The transparency of glasses allows to have the light and the desired privacy only by applying customized screen printing, renewable and removable any time. The transparency is combined with the filing only by skirting the perimeter of the cabinet with the glass in respect of functionality and aesthetics. The transparency that cancels the diaphragms of the walls,  allowing light to pass through many walls, optimizing interior space and electric energy consumption. The full height glass office wall system consists of  an interlocking combination of many extruded aluminum "exclusive" profiles, creating a solid perimetric load-bearing profile, slim and with considerable aesthetic value.

STRUCTURAL  PROFILE – Realized  by extrusion size 44x30 mm. with specific technical hollows:

• central hollow for insertion of leveling small feet - for grafting of "L" shaped strenghtening squares with vertical profiles - for technical passage of wires – for passing of tips and fishers to fix the profile to the ceiling and the floor;
• 2 side hollows for inserting clamping clips of the carter to the snap structural profile;
• 2 upper hollows for the insertion of the glazing bead profile, 2 side rails, for the insertion of the finishing carter.

CARTER PROFILE – Realized by extrusion in rounded version 70 h mm (44x70h mm total volume) and 60 h mm in square version (44x60h mm total volume) with specific technical hollows:

• an internal hollow to accommodate the sliding bearings of the sliding door frame;
• an upper hollow to accommodate  a ballon shaped seal that locks and secures the glass plates;
• an inserting wing to the banks of the  structural profile, a pawl to the basis for insertion into clips  inserted in the hollow of the structural profile.

GLAZING BEAD PROFILE – Realized by extrusion dim. 12x30 h, with specific technical outlines that allow the snap insertion into the  structural profile hollows, in order to have the blocking function  of the glass plates to  the ceiling.

TELESCOPIC DEPARTURE PROFILE – Realized  by extrusion size 44x40 h with specific technical hollows with insertion for omega profile.

OMEGA TELESCOPIC PROFILE - Realized by extrusion 44x40 h with specific technical  hollows:

• central hollow for grafting of  "L" shaped aluminium profile fixing the omega profile to the structural profile;
• 2 upper hollows to accommodate  a ballon shaped seal that locks and secures the glass plates, a pawl for snap insertion to the starting profile;
• holes for insertion of the adjusters for vertical leveling.

The omega and starting profiles are telescopic, with the function of vertical leveling and rigid coupling when are just used to form the pillars of door frames or of the sliding doors frame.

SWING DOOR PROFILE – Realized  by extrusion size 40x44 h with specific technical hollows – hollow  on the closing side of the glass palte  for insertion of a balloon shaped seal, a pawl for snap insertion on Omega profile.

SWING DOOR FRAME - The frame is realized from  the coupling of the swing door profile  with the omega profile that accomodates  the glass plate of the partition  wall.

FULL HEIGHT GLASS SWING DOOR - Made of tempered glass 10 mm thick in transparent - etched – printed  versions.

FULL HEIGHT GLASS SLIDING DOOR - Made of tempered glass 10 mm thick in transparent - etched - printed versions.

FRAME FOR SLIDING DOOR - Made by coupling and securing the structural profile with a cover on which is practiced a suitable slotting for insertion of the sliding mechanism. Equipped also with other technical accessories for perfect sliding.

PILLARS FOR DOOR FRAME AND SLIDING DOOR FRAMES - Made for snap coupling, of the starting profile with  the telescopic omega profile together with the "L" shaped strenghtening squares between omega profile and structural profile.  The pillars used for sliding door frame have  shall be added with:

• at the base, with  pressure, with plate having guides for the sliding of glass door;
• on vertical side with methacrylate profile with whisker.

The pillars  used for passing frames have to be equipped with strenghtening  brackets between  structural profile  and omega profile.

STRATIFIED GLASS PLATES - Made of two coupled glass plates 5 +5 mm each  on intermediate strip of transparent PVB (polyvinyl butirale). The plate thickness 10/11 has a suitable shape to allow on the two vertical sides the specularity with the structural seal in transparent methacrylate. The size and finish of the plates are defined for each project.

STRUCTURAL JOINT BETWEEN GLASS PLATES - Made in transparent methacrylate size 4x10 mm. with shapes to accommodate the glass plates and equipped on the two sides with bi-adhesive seal protected by a film.

MORE WAYS LINKINGS - Made:

• with extruded aluminum square frame size 44x44 with 4 technical hollows  for inserting of glass plates and specular hollows for inserting of the balloon shaped seal;
• extruded aluminum profile  with the function of  cover, with snap-on insertion, for the hollows not used for the insertion of the glass plates.

This system allows 2-way linear linking and the orthogonal 2-3-4 ways linking.

VARIABLE LINKING - Manufactured with extruded aluminum round 60 mm profile  on which a “C” shaped profile is set, according to the radius determined, for the insertion of glass plates.

INSPECTIONABLE TECHNICAL  MODULE - Made with coupled extruded aluminum profiles in the version: between glass and glass - between glass and door - between door and door -  between wall and door.

FULL HEIGHT GLASS OFFICE WALL AND PARTITION OFFICE WALL - Made with extruded trapezoidal profile with specific shapes that allow  the union on one side with partition wall panels 100 mm thick  and on the other side with the full height  glass wall structure.

Styloffice wishes everyone a happy holiday season to spend with those you hold most dear. The offices will be closed the 27th, 28th, 29th and 30th of December. Merry Christmas and Happy New Year 2012.

The creation of an office is made ​​up of several steps. The installation and arrangement of office furniture in the company spaces may seem the most important one, but in reality it is not. For our company the conception and design of an office is essential.

The study, design and creation of custom made office furniture are our strenght, a way to demonstrate professional competence and attention to customer needs.

For Styloffice the step of projecting an office space, is never separated from the inspection and observations made on site by our technicians. What allows us to have all the information needed to formulate a proposal tailored according to specific needs, is the gathering of detailed information and a conversation with the customer. The work of designers and architects is supported by the potency of office furniture proposed by the company, always at the forefront of design and materials.

But the design of office space is just one of the many services we offer 5,000 office desks in stock, 15 collections of office furniture and walls constantly evolving, custom made office furniture, certification and quality systems.

Not only office furniture, but also many services to take care of the customer to 360 degrees.

The reception is the business business card, the first place where to receive guests and customers; for these furniture and seating need to be chosen with cure and attention, as also the position in the area reception.

Always better to receive help from experts, planners and architects, but here following some advice. It is preferred to arrange reception furniture at a correct distance from the entrance and to privilege luminous spaces, if eventually this is not possible, use light points illumination to create a pleasant atmosphere. Important to place the lights in order not to cause uneasiness for the customers and operators.

Select wide and long furniture for the reception area, so for operators to have space to receive and in the same time do their job. Today the reception still carries out its role of acceptance, but more and more being a real work station, with computer, printing and fax machine.

The reception is also the place where to station sofas and seats, it is important to create a nice waiting area, giving the guests the mode to attend comfortably.

The solutions offered by our company are in a position to assure prestige, but at the same time functionality; a large range of products, all customizable for the compostions, the materials, the colors: entering a company and being welcomed by perfection is possible.

Xeno Altius, the sofisticated collection of executive office furniture designed by Perin and Topan, fits exactly your taste and the design of your office. Styloffice allows the customer or the architect to customize the office, choosing any color or feature of leather, as well as the sofisticated design of the stitching. A very stylish product giving to the executive office great elegance and personality.

The office is not just furniture, but mostly many documents, files, folders all together that you need to keep in order. A desk and an office kept orderly, show not only your being more efficient, but above all a positive sign for those who enter in.

The location of the office furniture, the placement of objects on the desk, the arrangement of files and drawers help to create a comfortable working environment. A useful aid is represented by the storage systems that, like all other office furniture, must be chosen carefully and attentively.

Our company offers a large range of modular and customizable products, designed for filing and storing. Durable and certified office furniture, always updated solutions that you can find in the ranges of Styloffice.

Among the numerous solutions for storage, pride of our company are the fitted partition walls; office furniture with a dual function: the division of space and material filing. Facta and Facta Zen have a neat design, with or without socle, fully integrated with wall partitions. Available in two versions: closed (with doors) and open cabinets; partitions completely separate work environments with custom made closing panels.

The best technologies and knowledge in the field of office furniture available to all those who choose to rely on our company.

The office is indeed a place of work where you spend most of your day, but also a meeting place, where you receive people, you conclude your business and contracts are signed. Being reliable and credible in your activity comes across your own office, where everything speaks about you: office furniture, walls’ colour, accessories and the way you keep your desk orderly. So like a real business card, capable of instilling trust in you and in the work you carry out.

In furnishing your office there are not so many rules to be followed. The main and the most important one at the same time is always to follow your own tastes and personality, without overdoing.

For example, the preference for office furniture with great design, means an excellent choice for all those young and vibrant offices, where creativity is the king. Maximizing the visual impact, that this type of office furniture can give is a perfect choice, if yours is a business based on innovation and estrus.

A modern style, but definitely more sober, is instead recommended in all those cases where it is a must to communicate seriousness and professionalism. The advice is to choose minimal office furniture and prefer essential classic materials, like wood and glass.

If your office is mainly a place to conclude important business, the suggestion is to choose office furniture in leather, the only one able to make your office a professional one and very prestigious at the same time. This kind of office furniture is perfect to transmit personal credibility and business solidity.

The updated and well cared Styloffice catalogues offer many solutions to furnish in the best possible way your office, office furniture of quality at always competitive prices.

The internal design and the design of office furniture speak about the company, its philosophy, its strengths, its way to meet the challenges, much more than you think. For this reason, during office furnishing, it is important to rely on professionals of the field, who are able to satisfy every kind of need and create work environments that can stimulate positively people performance.

We are glad to present in details some of Styloffice realizations, best illustrating our company politics and approach to customer. Especially, we are going to talk about some of the accomplishments made by our company, in the past years, for major companies with headquarters in Rome.

In 2007 Evospace, which is a roman company, taking care of the interior design of industrial spaces, gives Styloffice the task to furnish the headquarter of American Express in Rome, the prestigious financial company known throughout the world.Our company has furnished American Express spaces with twenty-six workstations complete with returns, pedestals and chairs. Office furniture are of operative Glam G3 range, made of wood fiber ecological panels, 30 mm thick, class E1, ie having a low formaldehyde emission. While chairs, are operative office chairs of Bagger range, having the UNI EN 1335-1/2/3 certification.

It dates back to 2008, the installation of office wall partitions at the office headquarters of Sony Italy, in Rome. Styloffice took care to furnish business spaces with single glass office walls Nemo, the all glass movable office wall partitions with extruded aluminum frame and glass modules joined by transparent polycarbonate junctions. Sony Italy has also requested customized office walls; 3M films, reproducing the special symbols of the PlayStation controller, the popular video game console, are the overall theme of the wall partitions.

In the same year 2008, the Lamaro Group gives our company the task to produce and place office walls for the rooms of Luiss in Rome. Two are the types of walls provided; single glass walls, Nemo and fitted wall partition systems, Facta. These have been adapted to the spaces of classrooms, since the main goal was to make it easy to reach controls and electrical services for educational means.

You have to furnish an office in Rome? Rely on Styloffice for its furnishing, the company that stands out for its achievements in problem solving and speed in realizations.

We are happy to come back to Moscow, as indeed, Styloffice is not new in this beautiful part of the world. We are very keen on meeting with Russian companies, bringing our new assets for office furniture and partitions, informing about our products and services. Our claim is “ we project your space” and this is what we do, together with our parnters. We are confident to have good results in Russia. See you in Moscow

To furnish implies the choice of furniture according to their use as well as the decision of where to place them in the most appropriate way. Simple gestures that become more important if you have to furnish the workspace.

Many, in fact, are the rules to be followed in office activities, about occupational safety and environmental protection.

First of all, all the office furniture should be chosen according to UNI regulation (Italian Standards) EN regulation (European standards) ISO regualation (International Standards). The regulation specifies the technical details of office furniture, but we must not forget that the furniture purchased must also be marked by the CE mark, which certifies compliance with the essential requirements of European directives on safety, public health, consumer protection. We suggest that you have all the certifications once you ask for an offer.

Very important too, is to be sure that, the office furniture you are going to buy, has an additional certification, attesting the low release of formaldehyde. The CQA mark - Formaldehyde E1, identifies all those productions with low emission of formaldehyde, a substance classified as carcinogenic by the International Agency for Research on Cancer.

Formaldehyde is a colorless volatile gas and is soluble in water; it is widely used in the production of resins, which are used to produce furniture panels. The causes of the release of gases are often due to chemical phenomena, such as hydrolysis.

Changes in temperature, humidity and ventilation may influence the levels of volatile substances emitted by furniture. For example, high levels of temperature and humidity are able to increase the emission of these substances. It is still possible to get the materials with lower formaldehyde emissions: it is enough to carry out a pre-treatment of wood-derived materials, and a control of the amount of adhesive used during their production. In recent years, has become crucial, for the producers of raw materials and finished products, to combine the aesthetic level of furniture finish and interior furnishings, with the attention to the health of the final user.

All office furniture with Styloffice mark are characterized by low levels of formaldehyde. The company pays great attention to safety checks of office furniture: 360 ° attention beginning with raw materials and ending with the final product.

Movable walls are more and more becoming an unavoidable element in the division of work spaces.

At the boundary between furniture and construction, the interior movable walls are, by definition, non-bearing walls, placed in indoor environments and characterized by the concept of modularity. The office walls are classified into four types:

• movable interior walls;
• interior equipped movable walls;
• interior movable walls with stoarage units;
• interior movable equipped walls with storage units.

Since April 2004 all office partitions placed on the European market must be CE marked, that means compling with the  directive "Construction Products" 89/106/EEC (CPD). In addition, there are two UNI rules that define the terms and classification of movable interior walls, as well as the requirements that  the product must satisfy.

Specifically it is the UNI 10700 which specifies the terminology and classification for interior movable walls and  identifies functional types.The non-bearing interior walls with a function of separation between adjacent areas, consisting of prefabricated modular elements, completely finished before installation, interchangeable without degradation, with elements of the same size but with different types (opaque panels, glass panels, paper shufflers doors ) with or without storage capacity, with or without predisposition for equipment. The inner movable wall is entirely demountable and can be reassembled  in other places, having the same dimensions as the place of origin, without any degradation of components and without need for modification of the same.

While, the UNI 10820 rule  refers to the requirements a product must satisfy. The first part of the rule is concerned with the mechanical requirements, including impact resistance, differentiated according to use (public or private) and resistance to suspended loads; fire resistance, including the reaction to fire, measured on a scale from 0 to 6, and of the sound insulation. The second part of the rule is dedicated to other specific requirements of UNI 10820. The modularity, requirement defined by a predetermined dimensional parameter and coordinated in order to close with multiples and submultiples of the compartment made by the relative walls, the completed ceiling and floor. The flexibility of its usage, which is also the ability to adapt, with time passing, to a different  space configuration, in comparison with the original one. The dimensional adaptability of the wall, when placed in the physical place of destination, the variability of types, ie a variety of types of modules available: wooden (blind), fully glazed, partially glazed, door, modularity, ie the versatility of different combination of elements of different size and type, and the replacabilit and recoverability, maintainability, which is composed of cleanability, recoverability, and substitutability. The dimensional adaptability of the wall,  when placed in  the physical place of destination, the variability of types, ie a variety of types of modules available: wooden (blind), fully glazed, partially glazed, door, modularity, ie the versatility of different combination of elements of different size and type, and the replacabilit and recoverability, maintainability, which is composed of cleanability, recoverability, and substitutability.

In our catalogue, much space is devoted to office walls, and of course the core business of the company: office furniture. In the catalogue Planet Wall, we offers numerous office furniture design solutions. Planet Wall is the complete system of glass and wooden mobile walls, allowing a total and unitary design of the spaces with a broad functional diversification.

In the catalogue:

• Nemo - the full height glass office wall.
• Zen - the partition office wall without socle.
• Tecna - the partition office wall with socle.
• Tecna Open - the open space partition office wall.
• Facta Zen – fitted partition office wall without socle.
• Facta - fitted partition wall with socket.

All our office walls are marked by quality materials, used in accordance with the best market standards, well-designed, that suits the tastes of the customer. Designing your own workspace with personalized solutions it means to rely on companies such as Styloffice, which is the ideal partner for every need of furniture in the office furniture field.

It’s over twenty years we are offering furniture solutions for every kind of need, creating elegant original office furniture design solutions.

The reconfiguration of Styloffice products has been completed with the issue of the new catalogue "Operative Collection". From now on the design of office space finds in  Styloffice products the answer to every need, with an  elegant, clear and concise illustrated documentation. PLANET WALL:  a complete  catalogue of wall partitions. EXECUTIVE COLLECTION: a complete catalogue of executive office furniture. OPERATIVE COLLECTION: a complete catalogue of operative office furniture. Styloffice puts on disposition the following  too: OFFICE BOOK: a summary catalogue of office furniture and walls. CHAIRS COLLECTION :  catalogue of chairs. COMPANY PROFILE. Price lists are easy to read also:  Wall Partitions price list, Executive office furniture price list, Operative office furniture price list, Chairs price list.

Talent Gold is the top appendix, going to complete  the renewed Talent range. Gold is the collection of executive furniture with Talent structures and characterized by tops and furniture in tobacco oak and cherry veneer.

Talent, the famous collection of executive furnishing, appreciated all over the world, recently restyled elegantly to make it  more modern and current, has now  been enriched with a precious appendix: Talent Silver. It includes now desks with tops in MDF, in wenge finish with a sofisticated tapered edge, which gives the desk a more precious character. Ask for more information to our export department.

Often we pay little attention to the technical features of office chairs, considering them secondary to the office furniture. In fact, they play a major role, being the object on which you spend most of the day sitting.

Moreover, among the general measures of health and safety of workers in the workplace (Consolidated Safety at Work - Leg. 81/2008 - corrective and related provisions - Leg. 106/2009) also form part of it the respect of ergonomic principles in the organization of work, in the design of workplaces, in the selection of equipment and in the definition of working methods and production, in order to reduce the health effects of the monotonous and repetitive work.

The work in the office is fully part of this category. It becomes, therefore, essential to pay particular attention to the choice of office furniture, but mostly it is essential to know the technical features an office chair must have.

The ergonomic principles and the minimum functional requirements of an office chair are contained in the following standards:
 

• UNI EN 1335-2, safety requirements;
• UNI EN 1335-3, test methods for safety;
• UNI EN 1335-1, size and sizing.

The UNI EN 1335-2 2009, "Office furniture - Office chair - Part 2: Safety requirements", specifies the requirements for mechanical safety of office chairs. The characteristics are based on a daily usage of 8 hours by a person weighing 110 kg. Appendix A includes the standard loads, masses and cycle safety tests.

The UNI EN 1335-3 2009, "Office furniture - Office chair - Part 3: Test methods" specifies, however, the test methods to verify the stability, strength and durability of the office chairs. The approval tests must be applied to the chair as an article of office furniture, fully assembled and ready for use. The tests consist in applying forces simulating normal functional use and have been developed to evaluate the properties of the work chair, while do not apply to materials, design, production process.

While it remains in force the norm UNI EN 1335-1 Year 2000 "Office furniture - Office chair - Dimensions - Determination of size", which specifies both the size of three types of chairs (A, B and C) and the test methods for the determination of this size.

The  new operative catalogue has been completed along with the opportunity to furnish in full an office. Thanks to new innovative solutions and  finishes, now you can design your office with an absolute interchangeability. Movable partition walls, executive and operative furniture, operative systems, chairs, accessories, all having the same goal: transforming offices from "rooms with desks"  to effective and efficient "work tools".

Installation work of PARTITION and FURNITURE has just been completed  in O.D.C. (Oman Drydock Company), a global giant of naval industry. A great work marked STYLOFFICE,

Look at the new  Linear reception: simple, linear, to welcome in the company in a fresh and young way, but always with the due attention to elegance and design.  Available in wooden finishes  or with the very new version in colored methacrylate.

At the historical site in Miglianico (CH), Styloffice is restyling its offices and showroom too. The showroom offers more than 1000 m2 of exhibition where you can find dozens of different kinds of solutions for your office.  Styloffice’s furniture and partition walls are characterized by a clear tendency for design and integrated project. Architects and interior designers are able to offer the best projects for every kind of requirement, like new buildings or reorganization of the office. It’s even a place where you can get available suggestions and information that are a valuable support for all types of operators in the furniture industry. 

Coming soon : Styloffice’s operative Collection is becoming true!  Today planning offices is much easier with Styloffice’s integrated and transversal systems, where the possible combinations are endless.

This summer has been completed the second stage of the Eaton offices, a world leader in industrial automation. Once again this company has chosen Styloffice walls supplied by our valuable partner Oikos Margaria, of Turin.

The FSC (Forest Stewardship Council) certification,  is the main guarantee mechanism  about wood or paper origin. It is an international certification system, ensuring  that the raw material used to make a wooden or paper product , originates  from forests where rigid environmental, social and economic standard are applied. FSC, founded in 1993, includes among its members, environmental and social groups, indigenous communities, consumers associations, forest owners, technicians, certification bodies, industries treating  primary wood processing, transformation and marketing, working together to improve management of  forest resources around the world. Styloffice is among the first Italian companies, that  prints only with certified paper coming from responsibly managed sources.

Thanks to the prestigious and lasting partnership with Kuehne Nagel, a partner both of Styloffice and Ferrari, were completed in August last phases of installation of new spare parts warehouse offices of Ferrari, Maranello (MO), which have the brand Styloffice: Glam G3 series workstations and study semi-directional Talent Plus.

Even E-Security chose Styloffice to build two floors of offices with mobile walls and furniture designed by Styloffice. Our architects, in collaboration with Studio D'Urbano of Pescara, took care of design and optimization of working spaces and of course the installation.

Styloffice and new offices in Muscat. Thanks to Alex Devassa for sending us a first image.

Styloffice is revolutionizing the design of spaces. In September finally arrives "Operative Collection" the complete catalogue of two integrated operating systems, Glam and Sedici-Noni, with six different basements that offer full cross of solutions and finishes in an infinite number of combinations and finishes, all with the well-being at the center of the person in the office. We present a preview of some of the images that the catalogue offers as solutions.

From June 7th to 9th Styloffice was among the exhibitors at the seventh edition of the 'Expo Italian Real Estate (EIRE), in Milan, event-fair which each year attracts the most influential promoters and operators of the major real estate projects, completed or under design, not only on the Italian territory. EIRE is, for some time now, the opportunity for all operators specializing in real estate market to take stock of the situation and to analyze the evolution of the real estate scenario, deepening the conditioning (positive and negative) that they receive from the economic and social policies The event has confirmed the data from last year: 35 thousand square meters of exhibition area, 504 companies and institutions present, more than 14 thousand professionals (50 countries). Styloffice - we project your space: more than 200 visitors, including architects, general contractors and operators in the design of spaces, visited the elegant stand of Styloffice, creating and strengthening relationships and confirming more and more the attitude of the company to put " the design of the spaces "in the centre of our work.

The catalogue is a real illustration book of Styloffice world in office partition walls, elegant graphics and images in high-class, rich for completeness of information on products and latest experience of customization. Make it your request to the local agent or contact directly to Styloffice.

Furnish your office with office furniture Styloffice branded. Styloffice, a leader company in office furnishings, designs and manufactures solutions for executive offices, operatives, call centers and reception.

The Styloffice business strategy is tuned to quality, design and service, all at a competitive price. The company, in addition to providing office furniture, provides to the customer a staff of designers, able to adapt all the needs of the customer to the space, developing creative solutions that are both aesthetically pleasing and functional.

The Styloffice branded office furniture, are made ​​from the finest materials, from the classics such as wood, to the crystal and leather. The products are tested by leading research and development laboratories of the specific sector, such as CATAS, COSMOB, GIORDANO Institute, to offer customers the confidence to choose products with evidence of compliance with the standards and quality requirements resulting from the certification.

Styloffice, as well as certifying their office furniture, also boasts the certification UNI EN ISO 9001, that guarantees the company’s quality system with respect to the process of designing, production, scheduling, billing and distribution.