A system of office walls, that thanks to top and side adjustment, solves the problem of office rooms division and filing.
TECHNICAL FEATURES OF MIDDLE SIDES AND STRUCTURAL TOPS ON FLOOR AND TO CEILING - Made of 18 mm ecological wooden chip board, 22 mm thick, high-strength melamine-coated materials in aluminum finish. Edged with double-balloon seal for hydro-thermo-acoustic insulation. The sides have a double set of holes for assembly of structural tops, for equipping of hinges for doors, for adjustable positioning of self-centering pins of middle shelves, for fixing of filer drawer slides; further provided of leveling feet on the inner side of the sides.
INITIAL AND FINAL SIDES - Made with two coupled ecological chipboard panels. The outer panel 18 mm thick is covered with high-strength melamine materials and bordered with ABS thick border and rounded edges. Wood and pastel finishes. The inner panel 14 mm thick coated on both sides with high strength melamine materials and bordered with ABS thick edge with balloon for hydro-thermal and acoustic insulation. Aluminum Finishes. The coupled sides have a thickness of 32 mm and allow, with a technic system of coupling, to uniform the gap in the joints of all modules. The sides have a double set of holes for the assembly of structural tops, both of wood and metal, for tooling of hinges of the doors, for the positioning of self-centering pins of mobile metal tops, for fixing of drawer filers runners; are also equipped with leveling feet from the inner panel side.
DRAWER FILING FRONT PANELS - Made in the finish and thickness of the doors.
MOBILE TOPS AND INTERMEDIATE STRUCTURAL METAL TOPS - Made in steel sheet, thickness 8 / 10, prepared for inserting and sliding of the hanging folders. Epoxy powder coating aluminum color. The tops show 4 notching, 2 for each side, for solid joining to the pins with self centering neck chuck with extreme rapidity.
WOODEN DOORS - Made of “ecological” wood agglomerate, 18 mm thick, high-strength materials melamine-coated in the same finishes, wood and pastel shades, as the partition wall panels. ABS edge thickness with rounded corners in the same finish as the doors. The doors are standardly equipped with a 2-3-4 pairs of hinges according to their height with 90 ° opening (optional with 180 ° hinges). The entire door, the base door and the central door, is equipped with lock with sliding rod. The upper door has a fixed knob.
GLASS DOORS - These are made in two versions. Version 5 mm thick pure tempered glass transparent and etched (frosted). The doors are standardly equipped with a 2-3-4 pairs of hinges in relation to the same height, with 90 ° opening (on demand with 180 ° hinges). The doors are equipped only with knob without lock, regardless the height. Version with aluminum frame, having a profile fitted with seal, 4 mm thick tempered glass, transparent and etched (frosted). The doors are standardly equipped with knobs with or without lock and 2-3-4 pairs kf hinges in relation to the same height, with 90 ° opening (on demand with 180 ° hinges).
MODULES – The joint lines characterizing the modules of the Facta office walls are the same as Tecna office partition walls in vertical modules. Moreover, without the addition of the upper adjusting panel but with a top, the office walls can become an open space or furniture system under the windows or as a cover for fan coil units.
JOINTS - Aluminum fittings provide necessary joints for office fitted walls and between partition wall and fitted wall.
MODULES’ BACKS - Made of “ecological” wood agglomerate, 18 mm thick, high-strength materials melamine-coated in the same finishes, wood and pastel shades, as the doors and the partition wall panels. ABS edge thickness with rounded corners in the same finish as the panels.
ADJUSTEMENT BANDS - Made of “ecological” wood agglomerate, 18 mm thick, high-strength materials melamine-coated in the same finishes, wood and pastel shades, as the partition wall panels and doors. ABS edge thickness with rounded corners.
WOODEN DOOR - Made of wood, thickness 40 mm, coated on both sides in laminate with the same finishes as the filling panels, wood and pastel. ABS edging thickness with rounded corners in the same finishes of panels. The doors are standardly equipped with hinges, handle and lock, such as "push-open" or "lever".
GLASS DOORS - Made of tempered glass 10 mm thick, in clear, etched (frosted) and printed versions. The doors are standardly equipped with hinges, handle and lock, such as "push-open" or "lever".